This brass/plastic wall plate elbow is designed to connect a length of MDPE pipe to a tap fitting. It creates a 90' bend in the pipeline while offering the ability to mount the fitting securely...

Solid wall blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water...

Blue PP (polypropylene) drawcord used for pulling cables through ducting.

Water pipe system blanking plug

This 90 degree PLASSON elbow is designed for use with MDPE water pipe to create a 90dg bend in the pipe line.

This 90 degree PLASSON elbow is designed for use with MDPE water pipe to create a 90dg bend in the pipe line.

Push fit end plug designed for use in water systems

This PLASSON compression coupling is designed to connect metric MDPE water pipe together.

This PLASSON reducing coupler is designed for use with MDPE water pipe to reduce the nominal diameter.

Push fit reducing plug from 25mm down to 20mm

Push fit reducing plug from 32mm down to 25mm

This 90 degree PLASSON equal compression tee is designed for use with MDPE water pipe to create a 90 degree branch from the main line.

Plasson compression stopcock shut off valve for use with 20, 25 & 32mm MDPE pipe.

Pipe liner for use with MDPE water pipe. Protects pipe against crushing from compression fittings. One required for each compression point.